Today I got all the new supports in place and functioning. The trailer is now sitting on them. The tongue jack is in the air by about a quarter inch:
and the other jacks that were supporting it are also free. Like this:
By about an eighth of an inch. It looks like this:
Yes, I know there’s a larger overhang in the back. But there’s minimal weight there, and that part is angled up. I don’t see a need to add a support behind the rear door. I’ll let it sit overnight, then check whether those temporary supports are touching. I wouldn’t be astonished if it settles by up to a quarter inch, but it should be no more than that. Assuming all is stable I can remove all the bolts that hold the body to the frame. Then remove the wheels and let the frame down.
That’s all for today, but a big step.